Top Signal 65dB Dual-Band Repeater (TS112651)

Top Signal TS112651 65dB Building Repeater
Top Signal TS112651 65dB Building Repeater

Top Signal has an excellent 65dB dual-band (800/1900MHz) repeater for use in small homes and offices.

Top Signal is a bit different from the others in quality.  This is an extremely well-built unit that has everything you would expect, a heavy metal case for RF isolation, industry standard N-Connectors, ON/OFF switch, etc.  The one thing that stands out is the fact that in each TS112651 box is the QC test report from the manufacturer.  Each amplifier goes through a set of tests before leaving the manufacture and the test report is placed into the box with the amplifier.
Comparing amplifiers is becoming more difficult these days because the different manufacturers don’t present the exact same information in the same way.  The Top Signal TS112651 is a 65 dB amplifier.  It tests out at 65dB or better and runs at 65dB.  Other manufacturers may offer a 65dB amplifier, but it peaks at 65 but runs at a typical 60dB as the norm.  Looking at the test sheet for one of the TS112651 repeaters I saw that the 800 Cellular Uplink was 65.43 dB gain, 800 Cellular Downlink was 65.49 dB gain, 1900 PCS Uplink was 65.22 dB gain, and 1900 PCS Downlink was 65.04 dB gain.  In all there were over a dozen tests run for both 800 and 1900 frequencies and Uplink and Downlink.  I was impressed at the level of detail and the fact that each repeater goes through these tests.

4G LTE Wilson 801865 Repeater System for Verizon

Wilson 801865 4G LTE Repeater Kit
Wilson 801865 4G LTE Repeater Kit

The Wilson 801865 4G LTE 700 Repeater for Verizon was just released (Sept 22, 2011).  Powerful Signal has configured a complete 4G LTE repeater kit with the Wilson 801865 4G LTE amplifier.

This system, with the LTE antenna on the roof, will bring 4G LTE signal into a building and re-broadcast it within the building.  Many times there is a good 4G LTE signal outside the building, but concrete, steel and other building materials block signals and creat weak signal areas within buildings.
The Wilson 801865 4G LTE 700 system from Powerful Signal comes with everything needed to solve your 4G LTE problem within your building.  Below is what is in the system.
  1. Outside 4G LTE Yagi antenna
  2. Universal J-Pipe Mount for Yagi
  3. Inside 4G LTE Dome antenna
  4. 2 lengths of low loss coax to connect antennas

Powerful Signal has several 4G LTE Repeater Systems for Verizon.  Visit www.PowerfulSignal.com for more information.

4G LTE Antenna for Verizon 4G LTE

Powerful Signal has introduced a new 4G LTE antenna specifically for Verizon 4G LTE.  Many antennas are considered wide-band and cover many frequencies.  This new 40″ omni directional 4G LTE antenna is tuned specific to 746-806MHz which is used by Verizon for their 4G LTE.   The antenna comes with hardware to mount the antenna onto a pole up to 2″ in diameter.  An N-Female connector at the base of the antenna allows it to be connected to industry standard 400 coax with N-Male connectors.

Omni 4G LTE Antenna

Omni 4G LTE Antenna

Top Signal 55dB Mobile Vehicle Booster Kit

Top Signal 55dB Vehicle Cell Phone Booster

Top Signal 55dB Vehicle Cell Phone Booster

The Top Signal 55dB dual-band cell phone booster for vehicle use is offered by Powerful Signal.  This powerful cell phone booster is one of the strongest mobile vehicle systems on the market.

The Top Signal amplifier covers both 800MHz and 1900Mhz for all the major US and Canadian carriers except Nextel/iDEN.  55dB of gain provides helps fill large trucks and vehicles with better cell phone signal.

This newly released amplifier has the following technology:

  • AGC – Automatic Gain Level Control
  • AIC – Automatic Isolation Detection
  • Automatic reset.

The kit is complete and comes with FCC certified 800/1900MHz cell phone booster, 5dB gain magnet mount antenna, inside patch broadcast antenna, DC vehicle power supply.  Powerful Signal offer this system along with other Vehicle Cell Phone Boosters.

Wilson 801865 4G LTE Amplifier for Verizon

Verizon LTE is continuing with its roll-out across the country trying to satisfy the demand of high speed data users.  The Wilson 801865 4G LTE amplifier for Verizon is the newest entry into the cell phone booster market.  Cellphone-Mate introduced their SureCall CM700V 4G LTE Verizon booster a couple of months ago.

Wilson 801865 4G LTE 70dB amplifier

Wilson 801865 4G LTE 70dB amplifier

Both The Wilson 801865 4G LTE and the Cellphone-Mate CM700V are 70dB units that work with the Verizon 776-787/746-757MHz LTE frequency.  They both have adjustable gain control.  The Cellphone-Mate CM700V uses DIP switches and the Wilson 801865 uses knobs.  This gain control adjustment allows both the uplink and downlink to be adjusted for the installation environment.

Cellphone-Mate CM700V 4G LTE amplifier

Cellphone-Mate CM700V 4G LTE amplifier

Powerful Signal has created complete 4G LTE booster kits for both of these amplifiers.  These kits are designed to work in small homes and offices where the 4G LTE signal is weak.  Each kit comes with the following:

  • 4G LTE Amplifier
  • 4G LTE outside Yagi antenna – 10dB
  • 4G LTE inside dome antenna
  • Outside antenna mounting pipe
  • 2 lengths of 400 coax

Powerful Signal has a complete line of cell phone booster/repeater systems for home, office, warehouse, and high-rise buildings.

Motorola M800 Digital Bag Phone for Verizon

The Motorola know for its M800 Analog Bag Phone also has a newer digital version for use with the modern digital networks.  Powerful Signal has located a source for Motorola M800 Digital Bag Phones that can be used with Verizon digital cellular networks.  These digital bag phones can be activated with a new Verizon account or added as a second line to existing Verizon accounts.

Motorola M800 Digital Bag Phone for Verizon

Motorola M800 Digital Bag Phone for Verizon

The M800 Motorola Bag Phone is a completely self-contained cellular communications system that is excellent for constructions crews, oil and gas field service, RVers, boaters, hunters, or anyone who finds themselves in remote areas, but need to stay connected.

There are 3 ways the M800 is powered, by on-board rechargeable battery, vehicle lighter, or wall plug.  A complete accessory pack comes with the system that easily attaches to the M800 for portability.  The commercial grade case encloses all equipment including the flip-up antenna.

Contact Powerful Signal for more information and to purchase the M800.  Powerful Signal also has a complete line of portable cell phone booster kits.

Verizon 4G LTE Booster System

Cellphone-Mate CM700V LTE Amplifier

Cellphone-Mate CM700V LTE Amplifier

Verizon is rolling out their high-speed 4G LTE around the country and the demand for LTE boosters is starting to rise. As usual, their are buildings with concrete and steel that inhibit LTE signals from entering homes and offices.

Powerful Signal has configured a Verizon 4G LTE Building Repeater Kit using the new Cellphone-Mate CM700V 70dB LTE amplifier. This kit uses antennas specifically designed to handle the new 4G LTE 750MHz frequency. The powerful 70dB CM700V amplifier is large enough to be used in a small home or office. Uplink and downlink are adjustable by 31dB in 1 dB increments. This allows the system to be configured for different size environments.

The system comes with the following components:

  1. Cellphone-Mate CM700V LTE 70dB amplifier
  2. Wide-band directional exterior antenna
  3. Wide-band dome interior antenna
  4. 2 lengths of low loss 400 coax
  5. J-pipe mount for exterior antenna

Other cell phone booster building systems are available from Powerful Signal for a variety of building types.

Wilson 801245 AG SOHO Quick Kit Review

Powerful Signal has brought back the SOHO Quick Kit using the new Wilson 801245 AG SOHO 60 dual-band cellular amplifier.  This new Wilson 800/1900MHz amplifier now has adjustable gain so both the 800MHz and 1900MHz gain (broadcast power) can be individually adjusted for the specific environment where the amplifier is being installed.

Wilson 801245 AG SOHO 60 cellular amplifier

Wilson 801245 AG SOHO 60 cellular amplifier

The Wilson 801245 AG SOHO 60 Quick Kit is perfect for locations where exterior antenna placement is difficult or not allowed.  Usually the best location for a cellular amplifier outside antenna is on the roof of the home or office.  Sometimes this is not possible.  The Quick Kit uses a window mount panel antenna that attaches to the inside of a window with suction cups.  The antenna collects cell signal from the window location.  This means there needs to be usable cell signal at the window.

Window Mount Panel Antenna

Window Mount Panel Antenna

Easy and quick set up is one of the key features of the Wilson 801245 AG SOHO 60 Quick Kit.  There is no permanent installation required.  The inside broadcast antenna is a simple desktop antenna that can be placed on any flat surface.  Both antennas, outside and inside, are connected to the Wilson 801245 AG SOHO 60 cellular amplifier.  White 240 coax (up to 40′) is provided to connect the window mount panel to the amplifier and the desktop antenna has 5′ of coax used to connect to the cellular amplifier.  This type of set up and configuration makes this system perfect for condo, apartment, home, or office.  The kit can easily be moved from place to place.

The Wilson 801245 AG SOHO 60 Quick Kit is complete and ready to go.  Following is the kit contents:

Wilson 801245 AG SOHO 60 Quick Kit Contents

Wilson 801245 AG SOHO 60 Quick Kit Contents

  1. Wilson 801245 AG SOHO 60 amplifier and power supply
  2. Desktop Antenna
  3. Window Mount Antenna
  4. White 240 coax (1-20′, 2-10′)

The Quick Kit can be purchased at the following locations:

Powerful Signal and Wilson Repeater Store both have a complete line of Wilson 801245 AG SOHO cell phone booster systems configured for use in home, office, RV, boat, ambulance, and other configurations.

Wilson 801241/801242 Mobile Pro – iPad, PlayBook, Xoom Booster

Wilson Mobile Pro Booster
Wilson Mobile Pro Booster

Sometimes you need a cell signal boost for your cell phone,  iPad, PlayBook,  iPhone or whatever.  You want something simple and portable.  The Wilson Mobile Pro might be just what you need.

The internal cellular card in your iPad, PlayBook, Xoom does not go very far without a strong cell signal.  The Wilson 801241 & Wilson 801242 cell signal boosters amplify and improve the cell signal on your desktop or in your vehicle.  These two kits are an excellent choice for traveling.  Everything fits in a small carry case and the wall plug and vehicle power supplies allow you to plug in just about anywhere.
The Wilson Mobile Pro is a dual-band (800/1900MHz) cellular amplifier that works with all US and Canadial carriers that use the 800/1900MHz frequencies.  There are other types of cell signal boosters that can be used, but this unit has a great price and is very portable.

New Version Wilson 801262 Cell Phone Booster

Wilson Electronics has just released a new version of the Wilson 801262 DB Pro cell signal booster.   The new Wilson 801262 DB Pro amplifier takes after its two big brothers, the Wilson 801265 AG Pro 75 and the Wilson 801280 AG Pro 75 and sports two new control knobs for adjusting the gain on both the 800MHz and 1900Mhz frequencies.  This is a nice improvement and will help the new DB Pro amplifier to be more easily setup in tight places.

The new Wilson 801262 DB Pro amplifier has been put into the Wilson 841262 DB Pro Kit and the Wilson 841263 Kit.  These two kits are designed to be cost effective systems to boost and improve cell phone signals in small homes and buildings with 1 or 2 rooms.  Both these kits are available at the following locations: